diff --git config.sub config.sub
index 8e41b1c..7c724ca 100755
--- config.sub
+++ config.sub
@@ -243,6 +243,7 @@ case $basic_machine in
 	| bfin \
 	| c4x | clipper \
 	| d10v | d30v | dlx | dsp16xx \
+	| erc32 | leon | leon3 \
 	| fr30 | frv \
 	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
 	| i370 | i860 | i960 | ia64 \
@@ -322,6 +323,7 @@ case $basic_machine in
 	| clipper-* | craynv-* | cydra-* \
 	| d10v-* | d30v-* | dlx-* \
 	| elxsi-* \
+	| erc32-* | leon-* | leon3-* \
 	| f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
 	| h8300-* | h8500-* \
 	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
diff --git configure configure
index 4eb60eb..7fbbfea 100755
--- configure
+++ configure
@@ -1552,7 +1552,7 @@ case "${target}" in
     esac
     noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
     ;;
-  sparc-*-elf*)
+  sparc-*-elf* | erc32-*-elf* | leon-*-elf* | leon3-*-elf*)
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
   sparc64-*-elf*)
@@ -3542,7 +3542,7 @@ case " $build_configdirs " in
     # For an installed makeinfo, we require it to be from texinfo 4.2 or
     # higher, else we use the "missing" dummy.
     if ${MAKEINFO} --version \
-       | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[2-9]|[5-9])' >/dev/null 2>&1; then
+       | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[2-9]|[5-9]|4\.1[0-9])' >/dev/null 2>&1; then
       :
     else
       MAKEINFO="$MISSING makeinfo"
diff --git configure.in configure.in
index 5397352..e466a35 100644
--- configure.in
+++ configure.in
@@ -760,7 +760,7 @@ case "${target}" in
     esac
     noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
     ;;
-  sparc-*-elf*)
+  sparc-*-elf* | erc32-*-elf* | leon-*-elf* | leon3-*-elf*)
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
   sparc64-*-elf*)
diff --git newlib/configure.host newlib/configure.host
index 01438a2..3d16abd 100644
--- newlib/configure.host
+++ newlib/configure.host
@@ -111,6 +111,11 @@ case "${host_cpu}" in
   ep9312)
 	machine_dir=arm
 	;;
+  erc32 | leon | leon3)
+        machine_dir=sparc
+        # FIXME: Might wish to make MALLOC_ALIGNMENT more generic.
+        newlib_cflags="${newlib_cflags} -DMALLOC_ALIGNMENT=8"
+        ;;
   fr30)
 	machine_dir=fr30
 	;;
diff -Nrup ../newlib-1.14.0.ref/config/mt-leonelf ./config/mt-leonelf
--- ../newlib-1.14.0.ref/config/mt-leonelf	1969-12-31 19:00:00.000000000 -0500
+++ ./config/mt-leonelf	2011-06-01 23:55:06.803113244 -0400
@@ -0,0 +1 @@
+CFLAGS_FOR_TARGET += -mfix-at697f
diff -Nrup ../newlib-1.14.0.ref/configure ./configure
--- ../newlib-1.14.0.ref/configure	2011-06-01 23:54:48.612798857 -0400
+++ ./configure	2011-06-01 23:55:06.803113244 -0400
@@ -2726,6 +2726,9 @@ case "${target}" in
   mips*-*-pe | sh*-*-pe | *arm-wince-pe)
     target_makefile_frag="config/mt-wince"
     ;;
+  leon-*-elf)
+    target_makefile_frag="config/mt-leonelf"
+    ;;
 esac
 
 alphaieee_frag=/dev/null
@@ -3308,7 +3311,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3312: checking for $ac_word" >&5
+echo "configure:3315: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3348,7 +3351,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3352: checking for $ac_word" >&5
+echo "configure:3355: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_BISON'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3387,7 +3390,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3391: checking for $ac_word" >&5
+echo "configure:3394: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_M4'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3426,7 +3429,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3430: checking for $ac_word" >&5
+echo "configure:3433: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3466,7 +3469,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3470: checking for $ac_word" >&5
+echo "configure:3473: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_FLEX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3505,7 +3508,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3509: checking for $ac_word" >&5
+echo "configure:3512: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3542,7 +3545,7 @@ case " $build_configdirs " in
     # For an installed makeinfo, we require it to be from texinfo 4.2 or
     # higher, else we use the "missing" dummy.
     if ${MAKEINFO} --version \
-       | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[2-9]|[5-9]|4\.1[0-9])' >/dev/null 2>&1; then
+       | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[2-9]|[5-9])' >/dev/null 2>&1; then
       :
     else
       MAKEINFO="$MISSING makeinfo"
@@ -3558,7 +3561,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3562: checking for $ac_word" >&5
+echo "configure:3565: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_EXPECT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3599,7 +3602,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3603: checking for $ac_word" >&5
+echo "configure:3606: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RUNTEST'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3647,7 +3650,7 @@ test -n "$target_alias" && ncn_target_to
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3651: checking for $ac_word" >&5
+echo "configure:3654: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3678,7 +3681,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3682: checking for $ac_word" >&5
+echo "configure:3685: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3722,7 +3725,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3726: checking for $ac_word" >&5
+echo "configure:3729: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3753,7 +3756,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3757: checking for $ac_word" >&5
+echo "configure:3760: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3797,7 +3800,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3801: checking for $ac_word" >&5
+echo "configure:3804: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3828,7 +3831,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3832: checking for $ac_word" >&5
+echo "configure:3835: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3872,7 +3875,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3876: checking for $ac_word" >&5
+echo "configure:3879: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3903,7 +3906,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3907: checking for $ac_word" >&5
+echo "configure:3910: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3947,7 +3950,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3951: checking for $ac_word" >&5
+echo "configure:3954: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3978,7 +3981,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3982: checking for $ac_word" >&5
+echo "configure:3985: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4022,7 +4025,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4026: checking for $ac_word" >&5
+echo "configure:4029: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4053,7 +4056,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4057: checking for $ac_word" >&5
+echo "configure:4060: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4097,7 +4100,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4101: checking for $ac_word" >&5
+echo "configure:4104: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4128,7 +4131,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4132: checking for $ac_word" >&5
+echo "configure:4135: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4167,7 +4170,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4171: checking for $ac_word" >&5
+echo "configure:4174: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4198,7 +4201,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4202: checking for $ac_word" >&5
+echo "configure:4205: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4237,7 +4240,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4241: checking for $ac_word" >&5
+echo "configure:4244: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4268,7 +4271,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4272: checking for $ac_word" >&5
+echo "configure:4275: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4312,7 +4315,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4316: checking for $ac_word" >&5
+echo "configure:4319: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4343,7 +4346,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4347: checking for $ac_word" >&5
+echo "configure:4350: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4387,7 +4390,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4391: checking for $ac_word" >&5
+echo "configure:4394: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4418,7 +4421,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4422: checking for $ac_word" >&5
+echo "configure:4425: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4469,7 +4472,7 @@ fi
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4473: checking for $ac_word" >&5
+echo "configure:4476: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4500,7 +4503,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4504: checking for $ac_word" >&5
+echo "configure:4507: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4544,7 +4547,7 @@ fi
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4548: checking for $ac_word" >&5
+echo "configure:4551: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4575,7 +4578,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4579: checking for $ac_word" >&5
+echo "configure:4582: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4619,7 +4622,7 @@ fi
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4623: checking for $ac_word" >&5
+echo "configure:4626: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4650,7 +4653,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4654: checking for $ac_word" >&5
+echo "configure:4657: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4694,7 +4697,7 @@ fi
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4698: checking for $ac_word" >&5
+echo "configure:4701: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4725,7 +4728,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4729: checking for $ac_word" >&5
+echo "configure:4732: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4769,7 +4772,7 @@ fi
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4773: checking for $ac_word" >&5
+echo "configure:4776: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4800,7 +4803,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4804: checking for $ac_word" >&5
+echo "configure:4807: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4844,7 +4847,7 @@ fi
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4848: checking for $ac_word" >&5
+echo "configure:4851: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4875,7 +4878,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4879: checking for $ac_word" >&5
+echo "configure:4882: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4914,7 +4917,7 @@ fi
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4918: checking for $ac_word" >&5
+echo "configure:4921: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4945,7 +4948,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4949: checking for $ac_word" >&5
+echo "configure:4952: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4989,7 +4992,7 @@ fi
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4993: checking for $ac_word" >&5
+echo "configure:4996: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5020,7 +5023,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5024: checking for $ac_word" >&5
+echo "configure:5027: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5064,7 +5067,7 @@ fi
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5068: checking for $ac_word" >&5
+echo "configure:5071: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5095,7 +5098,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5099: checking for $ac_word" >&5
+echo "configure:5102: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5139,7 +5142,7 @@ fi
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5143: checking for $ac_word" >&5
+echo "configure:5146: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5170,7 +5173,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5174: checking for $ac_word" >&5
+echo "configure:5177: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5214,7 +5217,7 @@ fi
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5218: checking for $ac_word" >&5
+echo "configure:5221: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5245,7 +5248,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5249: checking for $ac_word" >&5
+echo "configure:5252: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5289,7 +5292,7 @@ fi
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5293: checking for $ac_word" >&5
+echo "configure:5296: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5320,7 +5323,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5324: checking for $ac_word" >&5
+echo "configure:5327: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5364,7 +5367,7 @@ fi
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5368: checking for $ac_word" >&5
+echo "configure:5371: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5395,7 +5398,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5399: checking for $ac_word" >&5
+echo "configure:5402: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5434,7 +5437,7 @@ fi
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5438: checking for $ac_word" >&5
+echo "configure:5441: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5465,7 +5468,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5469: checking for $ac_word" >&5
+echo "configure:5472: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5509,7 +5512,7 @@ fi
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5513: checking for $ac_word" >&5
+echo "configure:5516: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5540,7 +5543,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5544: checking for $ac_word" >&5
+echo "configure:5547: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5583,7 +5586,7 @@ fi
 RAW_CXX_FOR_TARGET="$CXX_FOR_TARGET"
 
 echo $ac_n "checking where to find the target ar""... $ac_c" 1>&6
-echo "configure:5587: checking where to find the target ar" >&5
+echo "configure:5590: checking where to find the target ar" >&5
 if test "x${build}" != "x${host}" ; then
   # Canadian cross, just use what we found
   echo "$ac_t""pre-installed" 1>&6
@@ -5608,7 +5611,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target as""... $ac_c" 1>&6
-echo "configure:5612: checking where to find the target as" >&5
+echo "configure:5615: checking where to find the target as" >&5
 if test "x${build}" != "x${host}" ; then
   # Canadian cross, just use what we found
   echo "$ac_t""pre-installed" 1>&6
@@ -5633,7 +5636,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target cc""... $ac_c" 1>&6
-echo "configure:5637: checking where to find the target cc" >&5
+echo "configure:5640: checking where to find the target cc" >&5
 if test "x${build}" != "x${host}" ; then
   # Canadian cross, just use what we found
   echo "$ac_t""pre-installed" 1>&6
@@ -5658,7 +5661,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target c++""... $ac_c" 1>&6
-echo "configure:5662: checking where to find the target c++" >&5
+echo "configure:5665: checking where to find the target c++" >&5
 if test "x${build}" != "x${host}" ; then
   # Canadian cross, just use what we found
   echo "$ac_t""pre-installed" 1>&6
@@ -5686,7 +5689,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target c++ for libstdc++""... $ac_c" 1>&6
-echo "configure:5690: checking where to find the target c++ for libstdc++" >&5
+echo "configure:5693: checking where to find the target c++ for libstdc++" >&5
 if test "x${build}" != "x${host}" ; then
   # Canadian cross, just use what we found
   echo "$ac_t""pre-installed" 1>&6
@@ -5714,7 +5717,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target dlltool""... $ac_c" 1>&6
-echo "configure:5718: checking where to find the target dlltool" >&5
+echo "configure:5721: checking where to find the target dlltool" >&5
 if test "x${build}" != "x${host}" ; then
   # Canadian cross, just use what we found
   echo "$ac_t""pre-installed" 1>&6
@@ -5739,7 +5742,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target gcc""... $ac_c" 1>&6
-echo "configure:5743: checking where to find the target gcc" >&5
+echo "configure:5746: checking where to find the target gcc" >&5
 if test "x${build}" != "x${host}" ; then
   # Canadian cross, just use what we found
   echo "$ac_t""pre-installed" 1>&6
@@ -5764,7 +5767,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target gcj""... $ac_c" 1>&6
-echo "configure:5768: checking where to find the target gcj" >&5
+echo "configure:5771: checking where to find the target gcj" >&5
 if test "x${build}" != "x${host}" ; then
   # Canadian cross, just use what we found
   echo "$ac_t""pre-installed" 1>&6
@@ -5792,7 +5795,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target gfortran""... $ac_c" 1>&6
-echo "configure:5796: checking where to find the target gfortran" >&5
+echo "configure:5799: checking where to find the target gfortran" >&5
 if test "x${build}" != "x${host}" ; then
   # Canadian cross, just use what we found
   echo "$ac_t""pre-installed" 1>&6
@@ -5820,7 +5823,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target ld""... $ac_c" 1>&6
-echo "configure:5824: checking where to find the target ld" >&5
+echo "configure:5827: checking where to find the target ld" >&5
 if test "x${build}" != "x${host}" ; then
   # Canadian cross, just use what we found
   echo "$ac_t""pre-installed" 1>&6
@@ -5845,7 +5848,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target lipo""... $ac_c" 1>&6
-echo "configure:5849: checking where to find the target lipo" >&5
+echo "configure:5852: checking where to find the target lipo" >&5
 if test "x${build}" != "x${host}" ; then
   # Canadian cross, just use what we found
   echo "$ac_t""pre-installed" 1>&6
@@ -5860,7 +5863,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target nm""... $ac_c" 1>&6
-echo "configure:5864: checking where to find the target nm" >&5
+echo "configure:5867: checking where to find the target nm" >&5
 if test "x${build}" != "x${host}" ; then
   # Canadian cross, just use what we found
   echo "$ac_t""pre-installed" 1>&6
@@ -5885,7 +5888,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target objdump""... $ac_c" 1>&6
-echo "configure:5889: checking where to find the target objdump" >&5
+echo "configure:5892: checking where to find the target objdump" >&5
 if test "x${build}" != "x${host}" ; then
   # Canadian cross, just use what we found
   echo "$ac_t""pre-installed" 1>&6
@@ -5910,7 +5913,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target ranlib""... $ac_c" 1>&6
-echo "configure:5914: checking where to find the target ranlib" >&5
+echo "configure:5917: checking where to find the target ranlib" >&5
 if test "x${build}" != "x${host}" ; then
   # Canadian cross, just use what we found
   echo "$ac_t""pre-installed" 1>&6
@@ -5935,7 +5938,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target strip""... $ac_c" 1>&6
-echo "configure:5939: checking where to find the target strip" >&5
+echo "configure:5942: checking where to find the target strip" >&5
 if test "x${build}" != "x${host}" ; then
   # Canadian cross, just use what we found
   echo "$ac_t""pre-installed" 1>&6
@@ -5960,7 +5963,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target windres""... $ac_c" 1>&6
-echo "configure:5964: checking where to find the target windres" >&5
+echo "configure:5967: checking where to find the target windres" >&5
 if test "x${build}" != "x${host}" ; then
   # Canadian cross, just use what we found
   echo "$ac_t""pre-installed" 1>&6
@@ -6013,7 +6016,7 @@ fi
 
 
 echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:6017: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:6020: checking whether to enable maintainer-specific portions of Makefiles" >&5
 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
   enableval="$enable_maintainer_mode"
@@ -6060,7 +6063,7 @@ esac
 # gcc for stageN-gcc and stagePREV-gcc for stage(N-1).  In case this is not
 # possible, however, we can resort to mv.
 echo $ac_n "checking if symbolic links between directories work""... $ac_c" 1>&6
-echo "configure:6064: checking if symbolic links between directories work" >&5
+echo "configure:6067: checking if symbolic links between directories work" >&5
 if eval "test \"`echo '$''{'gcc_cv_prog_ln_s_dir'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
diff -Nrup ../newlib-1.14.0.ref/configure.in ./configure.in
--- ../newlib-1.14.0.ref/configure.in	2011-06-01 23:54:48.612798857 -0400
+++ ./configure.in	2011-06-01 23:55:06.803113244 -0400
@@ -1521,6 +1521,9 @@ case "${target}" in
   mips*-*-pe | sh*-*-pe | *arm-wince-pe)
     target_makefile_frag="config/mt-wince"
     ;;
+  leon-*-elf)
+    target_makefile_frag="config/mt-leonelf"
+    ;;
 esac
 
 alphaieee_frag=/dev/null